eicrelectriciannearme.co.uk

EICR electricians · landlords, agents and homeowners

Put through to aqualified EICRelectrician near you.

Not every electrician inspects. We send one who does: qualified in inspection and testing, carrying calibrated kit, at a fixed price agreed before anyone books a visit.

Fixed price

From £75

Report

Within 48 hours

Inspector

Qualified to test

Exchange · local lines
020 3386 1854

N E SE SW W NW B M LS S NG CV BS L CF MK BN PL OX CB RG GU NE YO LE DE SO PO HU EX

Your postcode

e.g. LS6 2AB

That doesn’t look like a UK postcode. Try the first half, like LS6 or SW11.

Or dial direct

Type a postcode and press Connect me. We’ll show you what to say when you ring and what it costs. Or ring now: 020 3386 1854.

Putting you through to {pc}…

Line open for {pc}. Ring 020 3386 1854 and say “EICR, {pc}”. We’ll tell you on the call whether an inspector covers {pc}, the earliest date, and the fixed price: £75 for a studio, £98.99 for 1–3 bedrooms.

Line cleared. Type another postcode, or ring 020 3386 1854.

Every electrician wires. Fewer inspect.

An EICR isn’t installation work. It is a periodic inspection: a full check and test of wiring someone else put in, written up to BS 7671. The rules for rented homes say it must be done by a person qualified and competent to inspect and test. Switch between the two to compare.

The installing electrician

The inspecting electrician

EICR

Electrical Installation Condition Report: the result of a periodic inspection of existing wiring, with every finding coded.

EIC

Electrical Installation Certificate: issued for new installations, rewires and new circuits.

MEIWC

Minor Electrical Installation Works Certificate: for small jobs such as an extra socket on an existing circuit.

Six questions to ask any electrician before they book

Whoever you call, us included, these are the questions that separate a proper inspection from a quick walk-round. Open each line to hear the answer you want, and the answer you’ll get from us.

The answer you want

City & Guilds 2391 (inspection, testing and certification), or 2394 and 2395, or an equivalent EAL qualification, plus the current BS 7671 qualification. “I’ve been an electrician for years” doesn’t answer the question.

Our answer

We send inspectors qualified in inspection and testing, working to the current BS 7671. Ask on the phone which qualification they hold and who is coming, and ask to see the certificate.

The answer you want

A full-scope competent person scheme or registration body, with a registration number you can look up yourself. Industry guidance for landlords (Electrical Safety Roundtable, June 2025) lists this check.

Our answer

The inspector’s scheme number is yours on request, before the visit, so you can check it on the register.

The answer you want

Hours, not minutes. Every circuit is isolated and tested in turn, so a flat usually takes 1.5–2.5 hours and a 2–3 bed house 2.5–4 hours. Thirty minutes for a house means circuits weren’t tested.

Our answer

We give you an estimate of time on site when we quote, so your tenant knows how long the power will be off and on.

The answer you want

The full EICR: the summary and overall assessment, the schedule of inspections, the schedule of test results for every circuit, and each observation with its code. A one-page “certificate” alone isn’t the report.

Our answer

The complete report as a PDF within 48 hours of the visit, ready to send to your tenant, agent or council.

The answer you want

A fixed price for the inspection before the visit, and any repairs priced separately afterwards, with no pressure to book them on the day. You can use any qualified electrician for the repairs.

Our answer

Fixed price from £75, confirmed in writing before we book. Repairs quoted separately; you’re free to use anyone.

The answer you want

Yes, with public liability and professional indemnity insurance. The same industry guidance lists both. Ask any firm to email the documents before the visit and keep them with the report.

Our answer

Ask us on 020 3386 1854 and we’ll send the inspector’s details with your booking confirmation.

Look them up before they knock

Five minutes on the register tells you more than any website badge. This works for any electrician you’re thinking of booking, and it’s what a council would expect a careful landlord to have done.

electricalcompetentperson.co.uk

Step 1 of 5

Business name

Example Electrical Ltd

Trading address

1 Example Street, Anytown

Scheme

Competent person scheme

Registration no.

000000

Registered for

Domestic installation (Part P)

Inspection and testing? Ask.

Ask for the scheme and the number on the phone. They are what you search with.

Screenshot saved today

Illustration of a typical entry. Names and numbers are examples.

1

Ask for the scheme and the number

On the phone, ask which competent person scheme or registration body the inspector belongs to, and their registration number.

A firm that hesitates or “will send it later” hasn’t answered.

Ask for the scheme and the number on the phone. They are what you search with.

3

Match the details

The business name, trading address and registration number should match what you were told. A different name can mean a subcontractor, so ask who is actually coming.

Name, trading address and number should all match what you were told on the phone.

4

Check what they're registered for

Registration for installing (Part P work) is not the same as competence in periodic inspection. Ask directly whether inspection and testing is within their assessed scope.

Registration usually covers installation work. Ask directly whether inspection and testing is in their assessed scope.

5

File it with the report

Save a screenshot of the register entry with the date, and keep it with the EICR. If a council ever asks how you chose the inspector, it’s one page.

Save a dated screenshot of the entry and keep it with the EICR.

Government guidance for landlords points to the Registered Competent Person Electrical register and to Electrical Safety First’s “find a registered electrician” search. Keep a note of what you checked: it’s part of showing you took reasonable steps.

Source: GOV.UK, Electrical safety standards in the private and social rented sectors: guidance (updated Nov 2025).

When to hang up

Cheap reports cost landlords twice: once for the report a council won’t trust, then again for a proper one. These are the signs on the call or in the report that something is off. Heard any of these on a call, or spotted them in a report? Tick them for a straight answer.

A price far below everyone else's

Testing every circuit takes hours. A price far below the market usually means the testing doesn’t happen.

A report promised before the visit

“We’ll have it to you tonight” before anyone has seen the consumer unit is a certificate, not an inspection.

Under an hour on site

Ask your tenant how long they stayed. Isolating and testing each circuit can’t be done in a quick walk-round.

No schedule of test results

A real EICR lists readings for every circuit. Blank columns, or the same reading copied down the page, mean nothing was measured.

No registration number on request

Anyone competent to inspect can tell you where they’re registered. If they can’t, you can’t show the council they were qualified.

Everything coded C2, and sign today

Pressure to agree a large repair bill on the spot is a reason to pause. Ask what each code is for and get a second quote.

Limitations that cover most of the house

Some limits are normal, such as a sealed-off loft. A report that leaves out whole floors or most circuits doesn’t show the installation is safe.

Nobody can say who's coming

You should know the inspector’s name before the day, and your tenant should be able to check their ID at the door.

Call check

0 of 8 signs ticked

No warning signs yet

Tick anything you’ve heard or seen. No ticks is what you want from any electrician, us included.

Ask before you book

One sign on its own can have a fair answer. Ask the firm to explain it, and check them on the register.

Get a second quote

Two signs together usually mean corners will be cut somewhere. Compare with a fixed quote that says what is tested.

Hang up

Several signs together usually mean a walk-round sold as an EICR, and a report a council won’t trust. Book someone else.

or call 020 3386 1854

Ask us all six questions. We'll answer on the call.

Who's calling? We'll put you through.

Landlord, agent, homeowner or buyer: an EICR electrician near you does the same tests for everyone, but the rules, deadlines and price depend on who you are. Pick yours.

Landlord in England

The Electrical Safety Standards in the Private Rented Sector (England) Regulations 2020

You need

An EICR by a qualified and competent person, before a new tenancy starts and at least every 5 years, or sooner if the report says so.

Copies

Existing tenants within 28 days of the inspection; new tenants before they move in; the council within 7 days if it asks.

If it fails

Remedial or further investigation work within 28 days (or less if the report says), then written confirmation to the tenant and council within 28 days of the work.

Penalty

Up to £40,000 per breach since the 2025 amendment.

Our price

£75 for a studio, £98.99 for 1–3 bedrooms, fixed.

5 yrs

between inspections, at most

28 days

to send tenants a copy, and to fix C1, C2 and FI

£40,000

maximum penalty per breach

When you ring, just say

“EICR for a rented home in England, postcode LS6.”

HMO landlord

Same regulations, plus your licence conditions

You need

An EICR covering the whole building, including common parts, at least every 5 years. Many councils ask for it with a licence application.

Watch for

Licence conditions can ask for certificates to be sent when they’re renewed. Check your licence wording.

Extra time

More circuits, landlord’s supply, fire alarm and emergency lighting circuits. Allow half a day to a full day on site.

Our price

Priced on the call, after a few questions about rooms and common parts.

5 yrs

whole building, common parts included

½–1 day

usual time on site

On the call

fixed after a few questions

When you ring, just say

“HMO EICR, six rooms over three floors, postcode NG7.”

Letting agent

Booking on behalf of a landlord

You need

One contact for access, a fixed price your landlord approves before the visit, and the PDF report to forward the same day it arrives.

Good practice

Diary the 28-day tenant copy deadline from the inspection date, not the report date.

Several lets

Call with the list of addresses and sizes and we’ll price each one.

Our price

Per property, from £75.

28 days

tenant copy, counted from the inspection

48 hrs

full PDF report after the visit

From £75

per property, fixed

When you ring, just say

“Agent booking: three flats, here are the addresses.”

Landlord in Wales

Renting Homes (Wales) Act 2016 and fitness regulations

You need

An EICR at least every 5 years for occupation contracts, by a qualified person.

Copies

To the contract-holder within 14 days of occupation (changed from 7 days in 2022).

Check

Rent Smart Wales registration and licensing are separate duties.

5 yrs

between inspections, at most

14 days

copy to the contract-holder

From £75

studio or 1-bed, fixed

When you ring, just say

“EICR for an occupation contract in Wales, postcode CF24.”

Homeowner

No legal duty, good reasons to check

Suggested

The IET recommends a periodic inspection of an owner-occupied home at least every 10 years, and when the occupier changes.

Good times

Before renovating, after a flood or fire, if fuses keep tripping or you see scorch marks, and before an older relative moves in.

Our price

The same fixed bands as rentals: from £75.

10 yrs

IET recommendation for your own home

48 hrs

full PDF report after the visit

From £75

same fixed bands as rentals

When you ring, just say

“EICR for my own home, built in the 1970s, postcode BS7.”

Buying or selling

A homebuyer survey isn’t an electrical test

Buying

Surveyors note what they can see. An EICR tests what they can’t, and C1 or C2 findings can help you negotiate before exchange.

Selling

Having a recent report ready answers a common question on the property information form before a buyer asks.

Timing

Book as soon as an offer is accepted; access is easier before the move.

Pre-exchange

book as soon as an offer is accepted

48 hrs

full PDF report after the visit

From £75

fixed before we book

When you ring, just say

“EICR before exchange, 3-bed semi, postcode MK9.”

Holiday let owner

Not covered by the tenancy rules, still on you

Why

Short lets aren’t tenancies, but you have a duty of care to guests, insurers may ask for an EICR, and many booking platforms ask hosts to confirm safety checks.

Timing

Book it into a changeover gap or the quiet season so no nights are lost.

Our price

Same fixed bands, by number of bedrooms.

5 yrs

the interval many owners follow

Off-season

book it into a changeover gap

From £75

by number of bedrooms

When you ring, just say

“EICR for a holiday let, two bedrooms, postcode PL1.”

Dial the deadlines

The landlord rules in England come down to six numbers. Put your finger in a hole and turn: the dial takes you to the rule behind it.

Landlord deadlines

ENGLAND

Day 0

Inspected before the tenancy starts

A new tenancy can’t begin unless the installation has been inspected and tested. A valid report from the last 5 years covers this; you don’t need a fresh EICR for every new tenant.

Reg 3(1)(c), S.I. 2020/312

Day 0

5 years

Inspected at least every 5 years

Or sooner, if the last report sets an earlier date. The interval runs from the date of the inspection.

Reg 3(1)(b) and 3(2)

5 yrs

28 days

A copy to existing tenants

Each existing tenant gets a copy within 28 days of the inspection. New tenants get one before they move in; prospective tenants within 28 days of asking in writing.

Reg 3(3)(b) and 3(3)(e)

28 d

7 days

A copy to the council, if it asks

If the local housing authority asks in writing for the report, it must have it within 7 days of the request.

Reg 3(3)(c)

7 d

28 days

Repairs, then written confirmation

C1, C2 and FI items must be dealt with within 28 days, or the shorter time on the report. Then written confirmation from the electrician goes to the tenant and council within 28 days of the work.

Reg 3(4) and 3(5)

Fix 28

£40,000

The maximum penalty per breach

Councils can impose a financial penalty of up to £40,000 for each breach, up from £30,000 since the 2025 amendment. They can also arrange remedial work and recover the cost.

S.I. 2025/1043, amending S.I. 2020/312

£40k

What the electrician actually does

An EICR is mostly testing, and testing means switching circuits off. This is the order of a proper visit, and why each part matters to you.

Now:
arrival

ID shown

On arrival

ID, the scope and the limits

The inspector shows photo ID, then agrees with you or your tenant what’s being inspected and anything that can’t be reached, such as a boarded loft. Those are written into the report as limitations.

Why it matters: limitations are the first thing to read on any EICR.

arrival

ID shown

Power on

Visual inspection

Consumer unit, cables, sockets, switches, light fittings, bathrooms, earthing and bonding to gas and water pipes. Signs of heat, damage, DIY work and missing covers.

Why it matters: many C2 findings, such as missing bonding, are found by looking.

visual check

Look before test

Power off, circuit by circuit

Continuity of protective conductors

Checks that the earth path is unbroken from the board to every point, and that ring circuits really are complete rings.

Why it matters: a broken earth looks fine until something goes wrong.

continuity test

Ω R1+R2

Power off

Insulation resistance

A test voltage is applied between conductors to find damaged or deteriorating cable insulation, usually reported in megohms.

Why it matters: low readings point to damage, damp or ageing cable before it shows.

insulation test

MΩ at 500 V

Power off

Polarity

Confirms switches and protective devices are in the line conductor, not the neutral, so “off” really means off.

Why it matters: reversed polarity can leave a light fitting live when switched off.

polarity

L / N correct

Power back on

Earth fault loop impedance

Measures whether enough current would flow in a fault to trip the fuse or breaker fast enough, compared with the limits in BS 7671.

Why it matters: this is the test that shows protection would actually work.

loop impedance

Zs in Ω

Power on

RCD tests

Each RCD is tripped with a test instrument and its trip time recorded. The test button on the device is pressed too.

Why it matters: missing RCD protection where it’s needed is one of the most frequent findings.

RCD test

Trip time ms

After the visit

The report is written

Every reading goes into the schedule of test results, every finding gets a code, and the installation is marked satisfactory or unsatisfactory overall.

Our promise: the full report as a PDF within 48 hours.

the report

PDF in 48 h

Read the codes on your report

Old switchboards had indicator panels that showed which line needed attention. Your EICR works the same way: every finding gets one of four codes. Press a code, or pick a finding from your report to see which code it usually gets.

C1

Danger present

C2

Potentially dangerous

FI

Further investigation

C3

Improvement recommended

Press a code

Each one opens to show what the code means, what you have to do, and by when. Any C1, C2 or FI makes the whole report unsatisfactory.

C1: Danger present

Your finding: {finding}

Risk of injury now. Immediate action is needed.

What you do

Make safe straight away. Most inspectors isolate or make safe with your agreement before leaving. Permanent repair within 28 days at the latest.

Typical examples

Exposed live parts, burnt or melted accessories.

Overall

Report is unsatisfactory.

C2: Potentially dangerous

Your finding: {finding}

Not dangerous this minute, but could become so in a fault.

What you do

Urgent remedial work within 28 days, or less if the report says.

Typical examples

Missing main bonding, loop impedance too high, no earth to metal light fittings.

Overall

Report is unsatisfactory.

FI: Further investigation

Your finding: {finding}

Something needs looking into that couldn’t be resolved on the day.

What you do

Investigate within 28 days, or less if stated, then fix whatever it finds.

Typical examples

Low insulation readings with no obvious cause, circuits that can’t be traced.

Overall

Report is unsatisfactory.

C3: Improvement recommended

Your finding: {finding}

Doesn’t meet the current edition, but isn’t unsafe.

What you do

No legal deadline. Worth planning in, for example with other work.

Typical examples

Missing labels, older but sound wiring and accessories.

Overall

On its own, the report can still be satisfactory.

What does your report say?

Choose a common finding…

C1 | Exposed live parts (broken socket, missing cover) | Exposed live parts, such as a broken socket or missing consumer unit cover

C1 | Burning or scorch marks | Signs of burning or overheating at a socket or the consumer unit

C2 | No RCD on sockets used for outdoor equipment | No RCD protection on sockets likely to power equipment outdoors

C2 | Missing main bonding to gas or water | Main protective bonding missing or undersized at the gas or water pipe

C2 | Loop impedance too high | Earth fault loop impedance too high for the protective device

C2 | No earth to metal light fittings | No protective (earth) conductor on a lighting circuit with metal fittings

FI | Low insulation reading, cause unknown | Insulation resistance readings low on a circuit; cause not found

FI | Untraceable circuit | Circuit could not be traced or its purpose identified

C3 | Missing circuit labels | Consumer unit labelling missing or incomplete

C3 | Older but safe wiring | Older installation not to the current edition but not dangerous

Codes are the inspector’s judgement on your installation. If a code surprises you, ask which regulation it refers to. That’s a fair question and any good inspector will answer it.

The tariff, fixed before we book

Prices go by the size of the property, plus £89.99 for each extra consumer unit, and we confirm the exact figure in writing before the visit. It doesn’t change on the day.

Studio flat

Usually 1.5–2.5 hours on site

£75

1–3 bedroom home

Usually 2–4 hours on site

£98.99

4 bedroom home

Usually 4–5 hours on site

£109.99

5–6 bedroom home

Usually 5–7 hours on site

£149.99

HMO

Half a day to a full day, common parts included

On the call

Commercial unit, up to 10 circuits

£15 for each extra circuit

£149.99

Each extra consumer unit (fuse board) is £89.99, or £129.99 on a commercial EICR. Parking or congestion charges may apply where relevant. Repairs are never bundled in: if the report needs work, it’s quoted separately and you can use any qualified electrician. A consumer unit replacement starts from £650.

How long will yours take?

Tell us a little about the property. The price goes by its size, plus £89.99 for each extra consumer unit; the time shows how long the power will be going on and off, so you can warn your tenant.

Consumer units (fuse boxes)

Garage, outbuilding or garden supply?

Fixed price

£98.99

£89.99

Likely time on site

about 3 hours

half a day to a full day

The price is confirmed in writing before booking and doesn’t change on the day.

Each extra consumer unit adds £89.99 and time on site; outbuildings and older wiring add time only. The price is confirmed in writing before booking.

HMOs vary with rooms and common parts, so we confirm the exact figure on the call before booking.

Before you ring, have these to hand

A two-minute call gets you a fixed price and a date. Tick what you’ve got and watch the call ticket fill in.

The postcode and address

So we can tell you straight away whether an inspector covers it.

Postcode + address

Bedrooms, and whether it's a house, flat or HMO

That sets the fixed price band.

Bedrooms / type

Who will let the inspector in

Your tenant’s number or the agent’s, if you won’t be there.

Tenant contact

The date of the last report, if any

And a copy if you have it: previous limitations help.

Last EICR date

Where the consumer unit is

Cupboard, cellar or communal meter room, and whether it needs a key.

Board location

Parking

Permit zone, visitor bays or a driveway: the inspector carries heavy kit.

Parking notes

Call ticket

To: 020 3386 1854 · EICR quote

Nothing ticked yet. You can still ring without any of it.

READY TO RING

After the report, three lines out

Whatever the report says, it sends you down one of three lines. None of them requires using the same electrician.

Your EICR

Overall: satisfactory or unsatisfactory

Satisfactory: file it

Send copies to your tenants within 28 days, keep it until the next inspection, and diary the next date (5 years, or sooner if the report says).

C2 or FI: 28 days

Get the work done within 28 days or the shorter period on the report, by any qualified person. Then send written confirmation to the tenant and council within 28 days of finishing.

C1: made safe now

Danger present. Most inspectors will make it safe or isolate it with your agreement before leaving, and tell you and the occupier. The permanent repair follows.

What counts as “written confirmation”

A new satisfactory EICR, an Electrical Installation Certificate, or a Minor Works certificate from the person who did the repair. GOV.UK guidance lists all three.

Some repairs need Part P sign-off

In England, a new circuit, a replacement consumer unit or a rewire is notifiable. A registered installer self-certifies it; otherwise building control must be involved.

A second opinion is allowed

You can get the repairs quoted by another qualified electrician. We quote ours separately and never as a condition of the report.

Unsatisfactory report from someone else? We can quote the repairs.

Engraved, and in writing

No star ratings here. These are the things we put in writing when you book, so you can hold us to them.

The price is fixed first

Confirmed in writing before the visit is booked. From £75.

A qualified inspector

Qualified in inspection and testing, working to the current BS 7671. Ask to see the certificate.

Number on request

The inspector’s scheme number before the visit, so you can check the register.

Photo ID at the door

Your tenant can check who they’re letting in.

The full report in 48 hours

PDF with the schedule of test results, not a one-page summary.

Repairs never pushed

Quoted separately, after the report. Use anyone you like.

How often, by type of property

The 5-year rule is for rentals. Everyone else has a recommended interval rather than a legal one, and the report itself can set a shorter date.

Property

Interval 0 to 10 years

How often

Legal duty?

Where it comes from

Private rental, England

5 yrs

Before a new tenancy if there’s no valid report, then at least every 5 years

Yes

S.I. 2020/312, as amended by S.I. 2025/1043

Social housing, England

5 yrs

At least every 5 years

Yes, phased in from Dec 2025 to May 2026

2025 amendment to the same regulations

Rental, Wales

5 yrs

At least every 5 years

Yes

Renting Homes (Wales) Act 2016 fitness regulations

Rental, Scotland

5 yrs

At least every 5 years, plus appliance (PAT) checks

Yes

Repairing Standard, Housing (Scotland) Act 2006

Rental, Northern Ireland

5 yrs

At least every 5 years

Yes, all tenancies since Dec 2025

Electrical Safety Standards Regulations (NI) 2024

Owner-occupied home

10 yrs

Every 10 years and on change of occupier

No, recommended

IET guidance

Holiday let

5 yrs*

Many owners follow the 5-year rental interval

No set interval; duty of care applies

Insurer and platform requirements vary

* No set legal interval for holiday lets; many owners follow the 5-year rental interval. The report itself can set a shorter date for any property.

Leave yourself a message

Enter the date of your last report and we’ll write the due date on the pad, with a sensible day to ring about the next one. Save it to your calendar so it doesn’t depend on memory.

Date of the last EICR

dd/mm/yyyy

Interval

Rental: 5 years

60 | Rental: 5 years

120 | Owner-occupied: 10 years

36 | Report said 3 years

12 | Report said 1 year

Property nickname (optional)

e.g. Flat 2, Elm Road

While you were out

Re

EICR

Last report

—

Next due by

—

Ring us from

—

Number

020 3386 1854

Telephoned

Please call back

Will call again

Urgent

Directory enquiries

The questions people ask when they’re looking for an EICR electrician near them.

Not necessarily. An EICR is a periodic inspection, and the rules for rented homes require a person qualified and competent to inspect and test. Many electricians install but don’t do periodic inspections. Ask for an inspection and testing qualification such as City & Guilds 2391 (or 2394 and 2395) and a competent person scheme registration you can check.

Ask which scheme they’re registered with and for their registration number, then search the Registered Competent Person Electrical register at electricalcompetentperson.co.uk (England and Wales) or the scheme’s own register. Check the business name and address match, and keep a dated screenshot with the report.

Our fixed prices are £75 for a studio, £98.99 for a 1–3 bedroom home, £109.99 for 4 bedrooms and £149.99 for 5–6 bedrooms, plus £89.99 for each extra consumer unit. A commercial EICR is £149.99 for up to 10 circuits, and HMOs are priced on the call. The exact figure is confirmed in writing before the visit is booked. Repairs are quoted separately.

Usually 1.5–2.5 hours for a studio or 1-bed, 2.5–4 hours for a 2–3 bed house, 4–6 hours for 4–5 bedrooms, and half a day to a full day for an HMO. Older wiring, extra consumer units and outbuildings add time.

Yes, for periods. Most tests are done with circuits switched off one at a time. Let your tenant know about fridges and freezers, broadband, alarms and anything medical, and tell us about any equipment that can’t lose power.

No. Your tenant or agent can let the inspector in. They need access to every room, the consumer unit and, where possible, the loft and any outbuildings with electrics. Areas that can’t be reached are recorded as limitations.

Any C1, C2 or FI makes it unsatisfactory. In England, landlords must have the work done within 28 days (or the shorter time on the report) by a qualified person, then send written confirmation to the tenant and council within 28 days of the work.

Yes, if you choose them. You can also use any other qualified electrician or get a second quote. We quote repairs separately, after the report, and never as a condition of the inspection.

Mostly, yes. “Landlord electrical certificate” is the everyday name; the document the law asks for is the Electrical Installation Condition Report. New wiring gets a different document, the Electrical Installation Certificate (EIC).

Not if the current report is still valid. The installation must have been inspected before the tenancy starts and at least every 5 years. Give the new tenant a copy of the existing report before they move in.

No. An EICR covers the fixed installation: wiring, sockets, switches, light fittings and the consumer unit. Appliance testing is separate. In Scotland, landlords also need PAT checks on appliances they provide, and in England social landlords must have provided equipment checked.

At least every 5 years for rented homes in England, Wales, Scotland and Northern Ireland, or sooner if the report says so. For owner-occupied homes the IET recommends every 10 years and when the occupier changes.

Book the line, get a fixed price

Three short steps and we’ll call you back with the fixed price and to confirm a date. If you’d rather talk now, ring the number.

Quotes and bookings

Say “EICR” and your postcode.

Your request so far

Property

Not chosen yet

Fixed price band

—

You are

Landlord

Postcode

—

Preferred visit

—

Fixed in writing before booking · report within 48 hours · repairs quoted separately

Request a fixed price

Property
Visit
Contact
Property size
And you are…

We only use your details to answer this request.

Where is it, and when would suit you?

Who should we call back?

Next: your visit

Next: your details

Back

Please choose the property size.

Please enter the full property postcode, like LS6 2AB.

Please add your full name.

Please add a phone number we can call back.

Please add a valid email address.

Please add the property address.

Please choose a preferred inspection date.

Please choose today or a later date.

Please choose a preferred inspection time.

This is your preference. We’ll confirm the date and time when we call.